Description
The Quickwire Splitter is for use in conjunction with a Switch & Load. It allows for connection of multiple luminaires.
Connect to the ‘load’ inlet of your Switch & Load to create three separate ‘load’ connections. If your circuit has more than three luminaires then use one inlet on your initial Splitter to connect another Splitter. Repeat as needed.
Specifications
Rating: 16A 250Va.c.
Overcurrent protection limited to 16A
Standards: BS EN 60670-22
BS 5733-MF
Conductor Size: 1.0mm² – 1.5mm² Twin & Earth (CPC) Solid cores
Class 1 (conductors)
Dimensions: 23mm x 31mm x 84mm (cable entries inserted)
IP Rating: IP30
Cable Preparation
Cut and strip the 1.0mm² / 1.5mm² solid core, flat twin and earth cable as shown above:
Connections
Installation
Fixing
Removal
